Daoming Optics & Chemical Co., Ltd
HomeProductsTraffic Sign MaterialMicro Prismatic Reflective sheetingHIP Aluminium-based Reflective Sheeting
  • HIP Aluminium-based Reflective Sheeting
  • HIP Aluminium-based Reflective Sheeting
  • HIP Aluminium-based Reflective Sheeting
  • HIP Aluminium-based Reflective Sheeting

HIP Aluminium-based Reflective Sheeting

    Payment Type: T/T
    Incoterm: FOB,CIF
    Min. Order: 10 Roll
    Delivery Time: 10 Days

Basic Info

Model No.: DM7660

Reflective Material Type: Reflective Film

Type: HIP

Material: Other

Application: Other, Highways, Urban Roads, Elevated Road

Color: Other, Yellow/black

Roll Size: 1.22m*25m

Additional Info

Packaging: 1 roll / Carton box, 25 ctns / Pallet

Transportation: Ocean,Air

Port: Ningbo,Shanghai

Product Description

DM-Reflective films Series 7660 HIGH INTENSITY PRISMATIC ALUMINIUM BACKING GRADE is a microprism Reflective Film with flexible aluminium foil as the substrate. DM7660 uses the deformation characteristics of aluminum layer to enhance the adhesion of the reflective film in use. Applications for this sheeting include highways, urban roads, elevated road, bridges and communications and electricity facilities.


Item Code:DM7660
Product Size:1.22x25m
Color:Yellow-Black
Flexibility and plasticity: The deformation of the aluminum foil significantly reduces the resilience of the reflective film after bending.
Adhensive: Highly compliant pressure sensitive adhesive
Salt-water resistance: Prevent moisture from the aubstrate penetrating into the airbag
Retroreflective properties: Complying with ASTM D4956 type IV
Durability: Pass the 1800hr xenon lamp aging test, 10 years


Product storage

It is required to be used within one year after the aluminum-based film is bought.

1. Aluminum backing film should be stored in the room which is dry, clean, ventilated, no acid, alkali and other corrosive items, and avoid dampness, direct sunlight and 2 meters away from heat source.

2. The best indoor temperature is maintained at 5℃ to 35℃, relative humidity is not higher than 70%. Before use, it must be ensured that the aluminum backing film has been in the temperature of 20-28℃environment for 24 hours, otherwise, the adhesion of the aluminum backing film will be affected.

3. Reflective film must be stacked neatly in the same direction as the arrows(stacking less than 6 layers). Do not stack different size film together.

Operation Manual

1. Substrate treatment

As the aluminum backing film is mainly used in cement(such as pier, curb and tunnel portal), the surface must be properly cleaned. Otherwise, moisture, chemicals, dust and burrs attached to the surface will cause the bond strength of the aluminum backing film and the substrate to decrease.

When grinding the substrate, polished the burrs first, clean off most of the surface dust, and then wipe with a damp cloth.

2. Ratio of glue and diluent

⑴ After treatment, the substrate needs to be coated with DMPC-150 glue.

⑵ Glue should be diluted before use. (Optimum dilution ratio: PC-150 glue / diluent = 1/1).

3. Attentions before filming

⑴Making sure the surbstrate is clean.

⑵To ensure that the operating environment clean and operating tools complete.

⑶Marking lines to ensure the film flush.

⑷The film time should be about five minutes after applying the glue to the dry substrate.

4. Operation

⑴To align the aluminum backing film with the substrate,and select one side of the film, then separate 40cm film from the Release Film or Release Paper(The separated release film or release paper can be cut or folded). It is forbidden to adhere the separated film to the substrate in this process.

⑵To stick the sparated film to the substrate with light pressure. In order to avoid wrinkles in the film, care must be taken when sticking.

⑶Using hard moderate scraper which is wrapped with cloth to scrape film forward in a circulararc and slowly separate out the release paper, until the end. When the stick area is greater than 60cm*60cm, please scraping from middle to both sides in circulararc and exhausting air. Each time to move forward a third of the distance of scraper toensure that the film with the effective pressure.

⑷After finishing the post, all the edges of the film and substrate must be pressed with the above-mentioned tools.

⑸To wipe the surface of the film with a clean cotton cloth dampened with petrol.

5. Trimming

⑴Before trimming, make the edge of the film and the substrate bonding more firmly with a scraper.

⑵In the trimming, the cutting knife or other stainless steel knife as close as possible to the substrate. The knife must cut from top to bottom(knife and film at 30°).



(structure drawing)

Dm7660




Name Card

Company Overview
Daoming Optics and Chemical Co. Ltd (DM) is the first and only public listed Reflective Material Company which located in Zhejiang Province of China. DM is one of the leading professional manufactures and expoters of reflective materials and personal safety products worldwide. We offer a wide range of high quality reflective material products and excellent customer service.
DM wide range of products from reflective materials to high visibility safety apparels etc, are widely used in public safety and various projects to maintain safety worldwide.
DM products meet and exceed the specification of international standards of ASTM D4956, EN12899, AS/NZS 1906, KS A3507, ISO7591, ECE R104, FMVSS 108, DIN67510, JIS Z9107, SOLAS, EN ISO 20471, CLASS II, ANSI/ISEA 107, OEKO-TEX 100, EN11612, EN533, EN1150, EN13356 etc.
DM maintains the integrity of the quality control system of ISO9001. DM takes the extensive research and development strength and management practices to improve and enhance our products continously. We are committed to maintain this composure to be a competitive manufacturer in the domestic and global markets.

Company Photos
Production Certification

Looking for ideal High Intensity Prismatic Sheeting Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Aluminium Based Reflective Sheeting are quality guaranteed. We are China Origin Factory of Yellow Black Reflective Sheeting. If you have any question, please feel free to contact us.

Product Categories : Traffic Sign Material > Micro Prismatic Reflective sheeting

Email to this supplier
  • Rocky HuMr. Rocky Hu
  • Your message must be between 20-8000 characters

Related Products List

Home

Phone

About Us

Inquiry